Lathe

NLLSY204:

New, China S1-262A Pipe Threading Lathe

Distance Between Center and Flat Guideway 450 mm
Max Dia of Pipe Machined 114-340 mm
Max Turning Length of Workpiece 3000 mm
Max Center Distance (for tailstock) 3000mm
Height from Spindle Center to Ground 1150mm
Spindle Bore 355mm
Front and Rear Taper Bore 1:50
Spindle Speeds 5.6-254 RPM, off 12
Longitudinal and Cross Feeds 0.095-1.44mm, (32 kinds)
Whitworth Threads 1-14 TPI
Metric Threads 1-15mm
Module Threads 0.5-7.5mm
Diametric Threads 28-2 t/in
Vertical Distance From Spindle Taper to Bearing Surface of Tool 33mm
Section of Tool Shank 32x32 mm
Swivel Angle of Mid Side ±90°
Max Travel of Top Slide 200mm
Max Travel of Cross Slide 300mm
Cross Rapid Moving Speed of Tool Post 4 m/min
Max Length of Taper Continuous Turning Workpiece 500mm
Max Length of Cross Moving 100mm
Tailstock Quill Diameter 100mm
Tailstock Quill Travel 250mm
Distance of Cross Moving of Tailstock ±15mm
Main Motor 18.5 Kw

The above machine is a new machine directly available for sale from the manufacturer.
Upon your purchase confirmation, we will immediately queue the machine into production.

If you require additional information on this machine or on any other new or used lathe (gap bed lathe, straight bed lathe, facing lathe, engine lathe, center lathe, turning lathe), please let us know. We would be more than happy to assist.

For sales and price enquiry, please contact Sunshine Innovation through telephone, fax or email.

Home | Lathe Listing | New Machinery Categories

Sunshine Innovation is the One-Stop shop for all your machinery requirements.

Elliott Concord Gap Bed Lathe
Between Centres 98.1/2"
Swing Over Bed 17.1/2"

Mitchell 10' Gap Bed Centre Lathe
Between centres 10'
Swing over bed 450mm

DSG 3ft Lathe
DSG Lathe
Between Centres 3'
Swing Over Bed 17"

Sunshine Innovation Enterprise - Specialist in new & used metalworking, fabrication machinery and machine tools.

Sunshine Innovation
Website