New, China CW6280C/5000 Gap Bed Lathe (New Design)
- Between centers 5000mm
- Swing over bed 800mm
- Swing over saddle 480mm
- Swing of gap 1000mm
- Width of gap 310mm
- Spindle bore and nose Ø130; D11
- Taper in spindle nose and centre Ø140; Morse No. 5
- Range of spindle speed 5.4-720 r/min (18 kinds)
- Range of longitudinal feed 0.06-24.3 mm/r (64 kinds)
- Range 1:1 = 0.1-1.52 mm/r
- Range 16:1 = 1.6-24.3 mm/r
- Range of fine feed with change gears 0.06-0.912 mm/r
- Longitudinal and cross feed rate 1/2
- Rapid traverse of carriage 4000 mm/min
- Lead screw pitch 12 (Metric); 1/2"
- Threads: Metric 1-240 mm (50 kinds); Inch 14-1 TPI (26 kinds); Module 0.5-120 mm (53 kinds); Diametric 28-1 DP (24 kinds)
- Max cross travel of lower slide 500mm
The above machine is a new machine directly available for sale from the manufacturer.
Upon your purchase confirmation, we will immediately queue the machine into production.
Lathe Listing |
New Machinery Categories
If you require additional information on this machine
or on any other new or used lathe (metal lathe, lathe turning machine, lathe turner, gap bed lathe, straight bed lathe, facing lathe, engine lathe, center lathe, turning lathe, hobby lathe, screwcutting lathe, centre lathe, conventional lathe),
please let us know. We would be more than happy to assist.
For sales and price enquiry, please contact Zhongyang Engineering through
telephone, fax or email.
Our customers remain loyal to us because of our commitment to after-sales service.
Niles Centre Lathe
Between Centres 11'
Swing Over Bed 25"
Facing Headstock Lathe
Face Plate Diameter 54"
Elliott Concord Gap Bed Lathe
Between Centres 98.1/2"
Swing Over Bed 17.1/2"