New, Taiwan TC-1250H Radial Drill
- Drilling capacity: 50mm (steel); 60mm (cast iron)
- Tapping capacity: 40mm (steel); 50mm (cast iron)
- Diameter of column 300mm
- Travel of spindle head 890mm
- Distance between spindle centre and column surface: 360 to 1250mm
- Distance between spindle end and base surface: 441 to 1345mm
- Elevating height of arm 630mm
- Effective area of box table 635 x 520 x 420mm
- Dimension of base 1785 x 785 x 190mm
- Taper hole spindle MT#5
- Vertical stroke of spindle 270mm
- Spindle speeds 56 - 1450 RPM (12 steps)
- Feed of spindle 0.06, 0.10, 0.20 rev (3 steps)
- Main motor 5 HP (two speed)
- Elevating motor 1 HP
- Hydraulic clamping motor 1 HP
- Coolant equipment 1/8 HP
- Machine height from floor (max.) 2645mm
- Base + column height 2080mm
- Overall Dimensions: 2,060 mm (L) x 995 mm (W) x 2,240 mm (H)
- Weight approximately 2.3 ton
The above machine is a new machine directly available for sale from the manufacturer.
Upon your purchase confirmation, we will immediately queue the machine into production.
Radial Drill Listing |
New Machinery Categories
If you require additional information on this machine
or on any other new or used radial drill (radial drill, radial drilling machine, radial drill press, radial arm drilling machine, radial arm drill press),
please let us know. We would be more than happy to assist.
For sales and price enquiry, please contact Zhongyang Engineering through
telephone, fax or email.
Zhongyang is the One-Stop shop for all your machinery requirements.
Asquith OD4 Radial Drill
Length of Arm 3048mm
Drilling Diameter 100mm
8ft Radial Drill
Max Drill Diameter 2"
Pollard Radial Drill
Rotary Table 6'