Used Ward No. 7 Turret Lathe
- AS IS WHERE IS Condition
- Diameter of chuck swing over cross slide 9"
- Diameter of chuck swing up to edge of cross slide 12"
- Length of longitudinal automatic feed to saddle (without chuck) 33"
- Rates of feed in spindle revs per inch of traverse: Gear box lever (coarse) 13, 18, 26, 38 and 52; (fine) 67, 93, 133, 193 and 270
- Length of longitudinal automatic feed (without chuck) 33"
- Two turret apron changes: 13, 18, 26, 38, 52; 67, 93, 133, 193, 270
- Motor 7.5 HP
Video for this machine is available as follows:
|Video for LH1840-1|
We are the supplier, seller and owner of the above used (second hand) machine.
The machine is for sale EX-STOCK and is currently located in our warehouse in Ipoh, Malaysia.
Turret Lathe Listing |
If you require additional information on this machine
or on any other new or used turret lathe (turret lathe, capstan lathe),
please let us know. We would be more than happy to assist.
For sales and price enquiry, please contact Zhongyang Engineering through
telephone, fax or email.
Have a machinery budget to stay within? Let us help.
Niles Centre Lathe
Between Centres 11'
Swing Over Bed 25"
Facing Headstock Lathe
Face Plate Diameter 54"
Elliott Concord Gap Bed Lathe
Between Centres 98.1/2"
Swing Over Bed 17.1/2"